Home > Hard Drive > Windows 10 Not Detecting Second Hard Drive

Windows 10 Not Detecting Second Hard Drive

Contents

Tell your state representative to support S618. sofaMonsterApr 29, 2013, 6:28 PM Hi!Have you tried turning in on and off? There were two SATA power connectors on a same wire in my computer case (the first one connected to the main HDD and the second one unused), so I used that And some of the users who are using the second hard drive have reported that their computer isn't able to detect the second one, after Windows 10 upgrade. useful reference

When I booted my machine it would hang before the grub bootloader showed up. If you tried a new cable and removed the drive and the issue goes away, I would say you have found your problem. I have a similar issue in that my PSU is fine with 3 HDDs on one SATA power cable, but won't boot if I use the 4th connector. Don't even think about continuing to use a hard drive that has had problems, even if repair utilities swear that the drive is now in perfect condition.

Windows 10 Not Detecting Second Hard Drive

Format my PC and start again? My hdd was very high sounding before it had been crashed. If I find an answer in the near future I will post it here. Tell them that you want the right to repair your purchases.

Sign up now. Stand up for the right to repair in Nebraska. I have the same issue with my computer except that it has been running fine all these while up until I reformatted my computer a couple of weeks ago. Internal Hard Disk Not Detected In Bios Also when I use the default Windows 8.1 bootloader it works just fine (for Windows only obviously).

I have Windows 10 on a SSD and added a 2TB HDD for extra storage, but the drive doesn't show up anywhere. I have a blank IDE Drive that I installed and it wasn't recognized until I went into disk managememnt, put it online, and formatted. Powered by vBulletin Version 4.2.2 Copyright © 2017 vBulletin Solutions, Inc. share|improve this answer answered May 4 '15 at 8:16 Sander Koenders 4917 add a comment| Your Answer draft saved draft discarded Sign up or log in Sign up using Google

Get the answer USAFRetDec 25, 2015, 7:11 PM Krisius said: USAFRet said: Is this a 'new' drive?Have you run any diagnostics from the manufacturer? Not Recognizing External Hard Drive Most 3.5 hdd run on the 5v wire when they are in standby. If you're fortunate, you may get some warning of impending drive failure, such as odd noises coming from the drive, dialogs warning of read or write failures, or a SMART drive However, I waited for a few hours and came back, and it seems to have done the trick.

Second Hard Drive Not Showing Up In Disk Management

get the picture.But I really think that if that was a good PSU you should not have had a problem. 12V1 is for your MB (CPU, GPU and maybe memory ( Everything works with my SSD alone but nothing works with my HDD attached.. Windows 10 Not Detecting Second Hard Drive There was a brief period of a couple of days after reformatting when everything was fine, so somehow I doubt it's any of those issues too. Secondary Hard Drive Not Detected In Bios arnel - 07/10/2015 Reply There are many methods to identificate a problems with hdd, but the best way i think is to hearing a sounds of your device.

Connect the drive to a different interface. see here After completing BIOS (depnding on whether quick boot is enabled in the BIOS or not) you should get an optional button to press which opens a dialog where you can add/remove I physically installed it inside the second HDD tray (making sure to ground myself and unplug the power cable). DON'T GIVE UP TOO SOON Although we have no direct experience with data recovery firms, our readers have recommended CBL Data Recovery (http://www.cbltech.com) and Ontrack (http://www.ontrack.com). Second Hard Disk Not Detected Windows 7

If you do, use that IDE and power cable and jumper setting. I use my 2TB for movies etc. What does that mean? http://channeltechnetwork.com/hard-drive/clone-hard-drive-windows-7.html I was puzzled.

If the drive is the PATA primary master, leave it configured as master, disable the primary ATA interface in BIOS Setup, and connect the drive to the secondary interface. How To Get Windows To Recognize Ssd Find out who represents you in the Nebraska legislature. I went back to Disk Management.

That way, Primary boot will be your sata drive your old hard drive will take your dvdrom's drive letter (D) Ask a question Member requests are more likely to be responded

Read Also: How to Fix Windows 10 Network Adapter Problems Tags: windows 10 fix Best Windows 8 App This Week: 3D Human Anatomy 10 Best Bluetooth Keyboards for Windows 10 Windows Quantitative expression for steric hindrance How to port LTRIM from Oracle to SQL Server? I am not sure but I think this is because I have OSX El Capitan running, rather OSX Lion or Mountain Lion. How To Detect New Hard Drive Windows 10 We’ve got to be louder than their lobbyists.

asked 1 year ago viewed 124 times active 1 year ago Related 2Dual Boot Linux and Windows 7 with GRUB1Grub 2 - attempting to boot into “Windows bootloader” boots me back Now, it's time to do the same for electronics. Second Sata Hard Drive Not Recognized by Windows XP 2nd SATA HDD not detected 2nd SATA Hard Drive not shown on my computer [Solved] (Solved) Helpful +175 Report diggleydog Nov 24, Get More Info Forum New Posts FAQ Calendar Community Groups Albums Member List Forum Actions Mark Forums Read Quick Links Today's Posts View Site Leaders What's New?

Report Movi- Dec 8, 2008 at 03:17 PM Just wanted to say, I never knew that - but then again this is the first dual laptop I have ever knowingly used. It’s time to fight for your right to repair and defend local repair jobs — the corner mom-and-pop repair shops that keep getting squeezed out. So you can fix the stuff you own quickly—and get back on with your life. Consider replacing it with something more powerful.If you remove the new drive and it still won’t boot—even to Setup—I’d suspect that you damaged something else while installing the drive.

But I suppose it's worth ruling out first. Members can monitor the statuses of their requests from their account pages. Related Resources PC doesn't load windows when installing a third SATA hard disk solved My PC doesn't properly work on the first boot of the day. Manufacturers like Apple are standing in the way.

Also contributing to this is that I recently bought a new graphics cards. I tried what u said to do to change it to auto and everything was already set to auto. View all 17 comments Report Same problem- Nov 11, 2008 at 12:36 AM Some people will say you are wrong but that is not the case. Followed your directions and it worked perfectly!

If the answer is, "not very and not much," you can take steps to recover the files yourself. Custom Search Join the PC homebuilding revolution! How Ubuntu can help a computer in distress Windows maintenance, done dirt-cheap Troubleshoot Your Boot-Up and Shutdown Problems Video AMD drops huge news on Ryzen overclocking and core counts at CES I've purchased Asus G750JM few days ago (8gb ram, 750gb HDD), installed SDD Intel 520 (120Gb) from previous Asus G74SX as a boot drive, with ASUS Backtracker made SDD works on

When your tractor breaks or your cell phone stops working, they want to be the only people who can fix it. Calendar Cubes are Impossible! Thanks Gornati, you don't need the RAID software installed - the images you posted showed the drives as available for RAID, but they are not currently in a RAID group. Be aware that when it is removed from the RAID array everything will be deleted from the drive.